Table of Contents |
---|
Overview
The Quantum Starter Kit is a collection of electronic components that can be used right out of the box with the Quantum IoT Platform.
|
|
|
|
Things used in this project
Hardware components
Picture | Name | Quantity | Link |
---|---|---|---|
Q-Client Builder Base | 1 | ||
PICTURE | Starter Kit | 1 | LINK |
Hand tools and fabrication machines
Picture
Name
Quantity
Link
Screwdriver
Story
When building a lot of wireless projects you almost always have the need for a good power supply, that can be used in different scenarios. This is why we built this 5V Power Supply DIY KIT.Components Overview
Image | Name | Quantity | How to use it? | What to build with it? | ||||
---|---|---|---|---|---|---|---|---|
I2C LCD Display | 1 | Temperature Display, Security System, HVAC System | ||||||
WS2812 RGB LED’s | 8 | |||||||
IR Emitter | 1 | |||||||
HC-SR501 PIR Sensor | 1 | |||||||
Stepper Motor + Driver Board | 1 + 1 | |||||||
L293D H-Bridge | 1 | |||||||
SG90 Servo Motor | 1 | |||||||
DC Motor (3-6V) | 1 | |||||||
7 Segment Display (Common Cathode) | 1 | |||||||
Ultrasonic Sensor | 1 | |||||||
Joystick | 1 | |||||||
Push Button | 6 | |||||||
Rotary Encoder | 1 | |||||||
Relay (5V) | 1 | |||||||
DHT11 Temperature / Humidity Sensor | 1 | |||||||
Potentiometer (10K) | 2 | |||||||
3x4 Keypad | 1 | |||||||
Breadboard | 1 |
| ||||||
MM Wires | 65 |
| ||||||
FF Wires | 20 |
| ||||||
MF Wires | 20 |
| ||||||
Green, Red, Blue LEDs | 4, 4, 4 | |||||||
RGB LED (Common Cathode) | 1 | |||||||
Reistors: 220, 10K, 1K | 20, 10, 10 |
| ||||||
Resistor Card | 1 |
| ||||||
Screwdriver (3mm) | 1 |
|