...
| Table of Contents |
|---|
...
Introduction
The Smartcolor Message Type is STRING based. A combination of Hex Triplets (Wikipedia - Hex Triplet) that can be used to control a Smart Light like a smart LED stripe (eg. WS2812).
...
Example Data
#FF0000#FF0000#FF0000#FF000(4 red LEDs)#000080(All LEDs are Navy)#000080#000080(First 2 LEDs are Navy)
...
Converts to
Message Type | Data |
|---|---|
Always triggers | |
Directly converts to color string | |
If first hex string is set to |
...
| Info |
|---|
Any Signal that is not mentioned on the table above should not be able to convert. |
...
Debug View
In the Debug View values can be written to or read from the drivers on the Builder Base directly.
Write
The smartlight smart color can be tested by sending it the three bytes that it will apply to the amount of lights configured in the driver. For example “FFFF00“ for yellow.
...