This space lists all “Input Control“ type devices. The devices are organized in subtypes below: |
Drivers to connect a Button to the Quantum System
GPIO | |
---|---|
GPIO w/Pull Up Low Energy | |
GPIO w/Pull Down Low Energy | |
MCP23017/8 |
The Joystick has three drivers that need to be configured for its services.
We have to use the 3.3V pin to connect to the Joystick, even though a lot of Joysticks are labeled with “5V“ on their power pin. This originates from other systems with a 5V based MCU. |
GPIO | |
---|---|
ADS1015 |
GPIO | |
---|---|
ADS1015 |
GPIO | |
---|---|
MCP23017/8 |
Drivers to connect a Potentiometer to the Quantum System
Drivers to connect Rotary Encoder to the Quantum System
The 4x3 Button Keypad has twelve drivers that need to be configured for its services.
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|
4x3 Keypad |
---|