Introduction
The LED of the Builder Base signalizes what state it is currently in. The LED does not only depend on the current state but also on the energy mode that the Builder Base is in. The energy mode gets determined during firmware configuration and creation. You can learn more about the different energy modes here.
LED States
| normal | low energy | ultra low energy |
|---|
initialization | lighting up  | lighting up | lighting up |
|---|
identification |  and  blinking
| and blinking | and blinking |
|---|
advertisement after reset | blinking | blinking | green blinking |
|---|
normal advertisement | blinking | blinking slow | 
|
|---|
connection to Q-Server | solid | blinking fast |
|
|---|