Description

This object is being used to talk to ‘Motion Sensor’ hardware components.

App Builder Object

GPIO	Use the GPIO driver for Digital Inputs
GPIO w/Pull Down Low Energy	Use the GPIO Pull Down (Low Energy) driver
GPIO w/Pull Up Low Energy	Use the GPIO Pull Up (Low Energy) driver
MCP23107/8	Use the MCP23017/8 driver for Digital Inputs
HC-SR501	Use the HC-SR501 driver

Position	Name	Message Type	Description
-	-	-	-

Position	Name	Message Type	Description
1	Motion detected	Digital	The digital value which is read / notified from the connected hardware component.

Name	Description
Object Name	The name of the object on the canvas.
App Mapping Description	When a hardware object requires mapping, this description is shown when the mapping function has been opened.
Multiwidget	Decide wether or not this hardware object can be mapped to single or multiple hardware components.