Introduction

The Infrared Message Type is STRING based and contains an infrared command in the Pronto-Hex format.

Example Data

Example for Samsung TV Power button:

0000 006C 0000 0022 00AD 00AD 0016 0041 
0016 0041 0016 0041 0016 0016 0016 0016 
0016 0016 0016 0016 0016 0016 0016 0041 
0016 0041 0016 0041 0016 0016 0016 0016 
0016 0016 0016 0016 0016 0016 0016 0016 
0016 0041 0016 0016 0016 0016 0016 0016 
0016 0016 0016 0016 0016 0016 0016 0041 
0016 0016 0016 0041 0016 0041 0016 0041 
0016 0041 0016 0041 0016 0041 0016 06FB

Look up more examples: http://irdb.tk/codes/

Converts to

Message Type	Data
Trigger	Always triggers
String	Directly converts

Any Signal that is not mentioned on the table above should not be able to convert

Debug View

In the Debug View values can be written to or read from the drivers on the Builder Base directly.

Write

A code in the pronto hex format can be written directly, spaces are allowed as well since most codes on websites include them.