Introduction

The Humidity Message Type is NUMBER based. It describes the humidity content in the air with a percent value.

Example Data

Message Type	Data

Message Type	Data
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396296237	Always triggers
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396230684	Directly converts
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396296289	Directly converts
	Clears Display and shows Humidity
	Directly converts
	Directly converts

Any Signal that is not mentioned on the table above should not be able to convert.

In the Debug View values can be written to or read from the drivers on the Builder Base directly.

A value between 0 and 100 is going to be returned.