Introduction

The Temperature Message Type is NUMBER based. Depending on the measurement settings of the system the values are either represented in metric (degrees in C) or imperial (degrees in F).

Example Data

10C
80F

Converts to

Message Type	Data

Message Type	Data
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396296237	Always triggers
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396230684	Directly converts
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/402031352	Clears screen and shows Temperature reading
	Directly converts to String according to measurement system
	Directly converts

Any Signal that is not mentioned on the table above should not be able to convert.

Debug View

In the Debug View values can be written to or read from the drivers on the Builder Base directly.

Read/Notify

The temperature in the current format of the system is going the be returned.