Introduction

Internal Message Type

The Stepper Message Type is NUMBER based. It can contain data like: the steps in positive or negative direction.

Example Data

180, -360

Converts to

Message Type	Data

Message Type	Data
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396296237	Always triggers
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/402031352	Clears Display and Shows Stepper reading
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396099698	Directly converts
	Directly converts

Any Signal that is not mentioned on the table above should not be able to convert.

Debug View

In the Debug View values can be written to or read from the drivers on the Builder Base directly.

Write

Any number positive or negative, 360 represents one rotation. For a negative number just write it like this: “-180“ which represents a counter clockwise half turn.