Introduction

The CO2 Message Type is NUMBER based and represents the CO2 level in parts per million (ppm).

Example Data

Message Type	Data

Message Type	Data
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396296237	Always triggers
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/396230684	Directly converts
https://quantumintegrate.atlassian.net/wiki/spaces/HELP/pages/402031352	Clears display and shows CO2 level
	Directly converts
	Directly converts

Any Signal that is not mentioned on the table above should not be able to convert.

In the Debug View values can be written to or read from the drivers on the Builder Base directly.

The CO2 content of the air in parts per million is going to be returned.