Restart and Factory Reset your Central Core

Generally there are two ways to restart or factory reset your Server. You can either use the “Reset Button” on your server or if you have access to the Server Interface you can reset it inside the Settings.

Reset Button

The Reset button is in the front of the Builder Base. To press it use a tool that fits inside the hole. (For example a needle, Tip of a Breadboard wire or a SIM Card access tool)

 

Restart your Server

This reboots your Builder Base.

Remember: When rebooting your server you will need to enter your Pin code again for everything to work. This will keep your Secrets save! This also applies when you power cycle your Builder Base.

From The Settings

To Reboot from the Settings Menu use the System Actions Tab hit the Restart Button and Confirm your Action.

 

With The Button

Press and hold for up to 5 seconds to reboot.

 

Factory Reset

The server will be reset to factory settings. You will lose existing saved data and settings!

After Resetting you will need to redo the Wifi Setup.

From The Settings

To Factory Reset from the Settings Menu use the System Actions Tab hit the Restart Button and Confirm your Action.

 

With The Button

Press and hold for more than 10 seconds to factory reset.