To set up the builder base you’ll need to power it on using a micro usb cable or using the coin cell battery.
After you powered on your Builder Base you should see the led inside the Base to start blinking in a regular pattern.
Navigate to Devices Clients in your Central Core Web-interface.
...
Inside the Devices Clients View you should see two tabs: Paired and Unpaired.
The Paired Tab shows you all the devicesclients, which are currently paired with the systems. This includes devices clients which derive from gateways.
The unpaired Devices clients however strictly represents Builder Bases.
Since you have not connected the Builder Base yet navigate to the unpaired devicesclients.
...
You should see a list similar to this one. If you have multiple Builder Bases unpaired at the same either power them off selectively to be able to keep them apart or connect all of them and identify them afterwards.
...
The Builder Base should now be removed from the unpaired devices and client sand be shown with the paired devicesclients. Verify that you identify the Builder Base using the actions. The Builder Base flashes green and red.
...