...
| Table of Contents |
|---|
...
Introduction
The Distance Message Type is NUMBER based. Depending on the measurement settings of the system the values are either represented in metric (cm) or imperial (inches).
...
Example Data
10cm
50inches
...
Converts to
Message Type | Data |
|---|---|
Always Triggers | |
Directly converts | |
Clears Screen and shows Distance reading | |
Directly converts to String according to measurement system | |
Directly converts |
| Info |
|---|
...
Any Signal that is not mentioned on the table above should not be able to convert. |
...
Debug View
In the Debug View values can be written to or read from the drivers on the Builder Base directly.
Read/Notify
The distance in the current format of the system is going the be returned.