Description

The Distance Message Type is NUMBER based. Depending on the measurement settings of the system the values are either represented in metric (cm) or imperial (inches).

Example Data

10cm
50inches

Converts to

Message Type	Data
Trigger	Always Triggers
Analog	Directly converts
Display Message Type	Clears Screen and shows Distance reading
String	Directly converts to String according to measurement system
Number	Directly converts

*Any Signal that is not mentioned on the table above should not be able to convert

Debug View

In the Debug View values can be written to or read from the drivers on the Builder Base directly

Read/Notify

The distance in the current format of the system is going the be returned