Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

Introduction

Internal Message Type

Uses String to represent URI to a Image.

Example Data

  • 'https://picsum.photos/200/300'

Converts to

Message Type

Data

Trigger

Always triggers

String

Directly converts

Any Signal that is not mentioned on the table above should not be able to convert.

Debug View

In the Debug View values can be written to or read from the drivers on the Builder Base directly.

The image message is not used in any driver at this point.


  • No labels