Description
This object is being used to talk to ‘Servo’ hardware components.
App Builder Object
Drivers
GPIO | |
---|---|
PCA9685 | |
TLC5940 |
In Ports
Position | Name | Message Type | Description |
---|---|---|---|
1 | Degrees | Number | The angle in the degrees which is applied to the connected servo. |
2 | 0 Offsets | Number | Offset setting for the 0 degree position. Since every servo is slightly different in its control, this setting allows you to level the servo at the exact 0 position. |
3 | 180 Offsets | Number | Offset setting for the 180 degree position. Since every servo is slightly different in its control, this setting allows you to level the servo at the exact 180 position. |
Out Ports
Position | Name | Message Type | Description |
---|---|---|---|
- | - | - | - |
Properties
Name | Description |
---|---|
Object Name | The name of the object on the canvas. |
App Mapping Description | When a hardware object requires mapping, this description is shown when the mapping function has been opened. |
Multiwidget | Decide wether or not this hardware object can be mapped to single or multiple hardware components. |