Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Current »

Description

The Temperature Message Type is NUMBER based. Depending on the measurement settings of the system the values are either represented in metric (degrees in C) or imperial (degrees in F).


Example Data

  • 10C

  • 80F


Converts to

Message Type

Data

Trigger

Always triggers

Analog

Directly converts

Display Message Type

Clears screen and shows Temperature reading

String

Directly converts to String according to measurement system

Number

Directly converts

*Any Signal that is not mentioned on the table above should not be able to convert

Debug View

In the Debug View values can be written to or read from the drivers on the Builder Base directly

Read/Notify

The temperature in the current format of the system is going the be returned

  • No labels