The Percent Message Type is NUMBER based and has a range from 0-100.
10%
20%
100%
Message Type | Data |
---|---|
Anything above 0% is true | |
Always Triggers | |
Directly converts (according to range: 0-100 → 0-4095) | |
Directly converts (according to range: 0-100 → 0-180) | |
Percent is scaled to fit the 255 Hex Range of Color and fills all three color values to represent a shade of grey. | |
Percent is scaled to fit the 255 Hex Range of Smart Color and fills all three color values to represent a shade of grey. | |
numbers between 0-15 are represented as 0-F | |
Clears screen and shows Percent in String on Screen | |
Directly converts (according to range: 0-100 → 0-255) | |
Directly converts to String | |
Directly converts (according to range: 0-100 → custom low-custom top) | |
Directly converts | |
0% turns off the light, everything above 0% turns on the light and sets the brightness to the percent value. | |
Directly converts (according to range: 0-100 → -255-255) |
Any Signal that is not mentioned on the table above should not be able to convert. |
In the Debug View values can be written to or read from the drivers on the Builder Base directly.
A value between 0 and 100 is going to be returned.