The Digital Message Type is BOOLEAN based, it only has the two states true and false. It can only transition from false to true (rising edge) and from true to false (falling edge).
true
false
Message Type | True | False |
|---|---|---|
triggers on rising edge | - | |
4095 | 0 | |
100% | 0% | |
“ON” | “OFF” | |
Light on | Light off | |
1 | 0 | |
top number of the set range | low number of the set range | |
displays “ON” | displays “OFF” | |
1 | 0 | |
All On White (0xFFFFFF) | All Off (0x000000) | |
White (0xFFFFFF) | Off (0x000000) | |
180 degrees (top of scale) | 0 degrees (low of scale) | |
255 (top of scale) | 0 (low of scale) |
Any Signal that is not mentioned on the table above should not be able to convert. |
In the Debug View values can be written to or read from the drivers on the Builder Base directly
“0” - sets output to false
“OFF” - sets output to false
“LOW” - sets output to false
“1“ - sets output to true
“ON” - sets output to true
“HIGH“ - sets output to true
“OFF” - if input is false
“ON” - if input is true